Guides

One thing at a time. Each can be read by itself.

Find a guide

Stations

A station has a name, a place and one or more things it measures: level, temperature, salt, or something you name yourself.

Move a station by dragging it on the map. What it has measured stays with it.

Charts

A chart shows one station over time. Choose a day, a week, a year, or drag across the chart for anything between.

To compare two places, open one and choose “Add a station”. Each gets a colour of its own.

Sending data

Anything that can reach the network can send a number. Several at once go in one line:

Shell
curl -d "level=1.42" -d "temp=8.1" -d "salt=33" https://tidewater.example/in/YOUR-STATION

A number is in the unit the station expects (metres, °C, grams a litre) unless the name says otherwise: level_cm=142.

Sensors we have tried

Maxbotix MB7389LevelThrough a Raspberry Pi
Atlas EC kitSaltThrough a Raspberry Pi
Seabird SBE 37Temperature, saltIts own network box
Any LoRaWAN gaugeLevelThe Things Network, forwarded

Importing old data

Measurements from before the station was added come as a CSV file: one line each, the time first, in UTC.

time,level,temp2026-01-01T00:00:00Z,1.38,4.22026-01-01T00:10:00Z,1.41,4.2

Drop the file on the station’s page, or send it with curl: curl -F file=@old.csv https://tidewater.example/in/YOUR-STATION/file

A file of up to 50 MB at a time. Lines with a time the station already has are skipped, so sending the same file twice does no harm.

People and access

Invite someone with their e-mail address and say what they may do:

Sees the stations and their charts. Changes nothing.